Construction of a machine for the manufacture of o-rings from elastomeric cords
- Authors
-
-
Juan Manuel León Meza
Universidad José Antonio Páez. San Diego, Venezuela -
Daniel Alejandro Rivero Vivas
Universidad José Antonio Páez. San Diego, Venezuela -
Giovvanni Pizzella
Universidad José Antonio Páez. San Diego, Venezuela
-
- Keywords:
- Mechanical Engineering, Gasket Manufacturing, Elastomeric Cords, Machine Design, Industrial Production
- Abstract
-
In the production and manufacturing sectors, the need for immediate O-rings represents a recurring technical challenge. Presents a research project whose objective was to design and build a machine capable of manufacturing O-rings with standardized diameters and thicknesses, using commercial elastomeric cords suitable for high temperatures, high pressures, and static and dynamic loads. The study was framed as a Feasible Project, with documentary and field design. The sample was census-based, consisting of O-rings evaluated for material, durability, strength, and efficiency. Techniques such as observation and interviews were used, with instruments validated by experts. The analysis was based on the Ishikawa diagram and descriptive statistics. The research was carried out in six phases: diagnosis, analysis of mechanical properties, selection of alternatives, design, machine construction, and feasibility evaluation. The results show that the machine enables precise and efficient manufacturing processes, ensuring quality and consistency in the produced O-rings. However, limitations were identified regarding the range of thicknesses and internal diameters, as well as mass production capacity. This work consolidated technical knowledge in the field of mechanical engineering and achieved the stated objective.
- Author Biographies
- Downloads
- Published
- 2026-01-30
- Section
- Trabajos de Investigación
- License
-
Copyright (c) 2026 Juan Manuel León Meza, Daniel Alejandro Rivero Vivas, Giovvanni Pizzella

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
ISSN:2244-7857
Depósito Legal: ppi200902CA3925
How to Cite
Similar Articles
- Ifigenia Requena Negrón de Guacarán, Editorial , Revista digital La Pasión del Saber : Vol. 6 No. 9 (2016): La Pasión del Saber. Volumen 6. Número 9. Enero-junio 2016
- Leidy Arrieche, Francisco Gelanzé, Emmanuel Medina, THEORETICAL CONCEPTUALIZATION OF VENEZUELA´S PYMESMICRO IN ACCORDING TO ONTOLOGICAL CHARACTERISTICS AND IT´S EVERYDAY PRAXIS , Revista digital La Pasión del Saber : Vol. 6 No. 10 (2016): La Pasión del Saber. Volumen 6. Número 10. Julio-diciembre 2016
- Wilmer Sanz Fernández, Ethics in robotics training in higher education: a moral imperative , Revista digital La Pasión del Saber : Vol. 14 No. 26 (2024): La Pasión del Saber. Volumen 14. Edición 26. julio - diciembre 2024.
- Alejandro Guillermo Ferrer Orta, Luis Manuel Rodriguez Herrera, Diseño de un prototipo para medición, registro y monitoreo del nivel de agua de un tanque mediante una página web , Revista digital La Pasión del Saber : Vol. 13 No. 23 (2023): La Pasión del Saber. Volumen 13. Edición 23. Enero - junio 2023.
- Danny F. Gómez R. , Yajaira J. Rodríguez N. , ETHNOHISTORY, EPISTEMOLOGY AND HERMENEUTICS OF THE FEDERAL WAR: MEMORY OF AN ILLUSTRATED COLONEL (1859 ˗1863) , Revista digital La Pasión del Saber : Vol. 9 No. 15 (2019): La Pasión del Saber. Enero - junio 2019
- Ifigenia Requena Negrón de Guacarán, EDITORIAL , Revista digital La Pasión del Saber : Vol. 4 No. 6 (2014): La Pasión del Saber. Volumen 4. Número 6. Enero-junio 2014
- Rosalinda Cattivelli , Rosa Pulido, COMPARATIVE STUDY OF THE USE OF FLAT PLATES WITH TYPE LABIAL ARCHES BIMLER HAWLEY AND TYPE STANDARD TWO CASE REPORTS OF ORTHODONTIC CLINIC , Revista digital La Pasión del Saber : Vol. 3 No. 5 (2013): La Pasión del Saber. Volumen 3. Número 5. Julio-diciembre 2013
- María Ángela Flores Páez, EDITORIAL , Revista digital La Pasión del Saber : Vol. 2 No. 2 (2012): La Pasión del Saber. Volumen 2. Número 2. Julio 2012
- Haydee Guillermina Páez. , Luis Guillermo José De Sousa, Evelyn Cristina Arreaza, Think Critically. A Desideratum of Multimodal Education , Revista digital La Pasión del Saber : Vol. 12 No. 22 (2022): La Pasión del Saber. Julio-diciembre 2022
- Carlos Blanco, Edita De Nobrega, Gladys Rocío Arocha Montoya, Carlos José Blanco, La Lectura como Proceso de Acercamiento al Conocimiento en los Estudiantes Universitarios , Revista digital La Pasión del Saber : Vol. 12 No. 21 (2022): La Pasión del Saber. Enero - junio 2022.
You may also start an advanced similarity search for this article.
