Diseño de un prototipo para medición, registro y monitoreo del nivel de agua de un tanque mediante una página web
- Authors
-
-
- Keywords:
- Palabras claves: Sensores y adquisición de datos, Automatización Industrial, Microprocesadores.
- Abstract
-
The present research work was developed with the purpose of designing a prototype capable of measuring the water level of a tank, which can store the information of each reading, using appropriate hardware, it must be registered in a database, to provide a monitoring service regarding the water supply of the telecommunications node. The monitoring system is made up of a tank in charge of storing the water. Inside the tank, there is a level sensor, which is responsible for measuring the required signal. In addition, this sensor sends the information through a data transmission device to the main headquarters for monitoring the water level. Its function is to record the level of water in the tank and the flow in the pipe where the water circulates inside the tank as it increases or decreases. Within the investigation, considerable emphasis was placed on the feasibility study from the development of the prototype.
- Author Biographies
- Downloads
- Published
- 2023-01-31
- Section
- Recensiones, Tesis y Trabajos de Grado
- License
-
Copyright (c) 2023 Alejandro Guillermo Ferrer Orta, Ingeniero Luis Rodríguez

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
ISSN:2244-7857
Depósito Legal: ppi200902CA3925
How to Cite
Similar Articles
- Sara Vidal, Milvida Castrillo, Protocolos de bioseguridad en la práctica odontológica durante la pandemia de SARS-CoV-2. Una revisión en Latinoamérica. , Revista digital La Pasión del Saber : Vol. 12 No. 22 (2022): La Pasión del Saber. Julio-diciembre 2022
- Yamiltza Camacho, DESIGN INSTRUCCIONAL OF STRATEGIES PEDAGOGICAS ON VIRTUAL COMMUNITIES FOR BLENDED LEARNING (CASE OF STUDY: INDUSTRIAL C.U.A.M , Revista digital La Pasión del Saber : Vol. 2 No. 3 (2012): La Pasión del Saber. Volumen 2. Número 3. Diciembre 2012
- Carolina Velásquez R., DESIGN OF ONE TRAINS FOOD PROCESSOR LOCATED WITHIN THE PROPOSAL OF URBAN REACTIVATION OF THE MUNICIPALITY THE GUAYOS, EDO. CARABOBO , Revista digital La Pasión del Saber : Vol. 2 No. 2 (2012): La Pasión del Saber. Volumen 2. Número 2. Julio 2012
- Yndira Deyanira Rodríguez Aguirre, EDITORIAL , Revista digital La Pasión del Saber : Vol. 15 No. 28 (2025): La Pasión del Saber. Volumen 15. Edición 28. julio - diciembre 2025
- Omar Figueredo, Haydee Páez, COGNITIVE STRATEGIES FOR BLENDED LEARNING , Revista digital La Pasión del Saber : Vol. 3 No. 4 (2013): La Pasión del Saber. Volumen 3. Número 4. Enero-junio 2013
- Haydee Páez, Omar Figueredo , CRITICAL THINKING IN BLENDED LEARNING ENVIRONMENTS , Revista digital La Pasión del Saber : Vol. 3 No. 4 (2013): La Pasión del Saber. Volumen 3. Número 4. Enero-junio 2013
- José Fernán Lara Ramírez, Design of a foam-based fire protection system for The El Valle C.A. Fuel Distributor. , Revista digital La Pasión del Saber : Vol. 15 No. 27 (2025): La Pasión del Saber. Volumen 15. Edición 27. enero - junio 2025
- Liliana Raquel Rojas González, Teodomiro Paredes Gavidia, Active breaks and artificial intelligence in administrative workers of a health care center. , Revista digital La Pasión del Saber : Vol. 15 No. Número Especial (2025): XIII Congreso Centroamericano y del Caribe de Salud Ocupacional. FECACSO 2025
- Sergio Noguera Gotopo, Lisbeth Soto Flores, Lean Manufacturing and Total Productive Maintenance: A Synergistic Perspective on Prevention in OHS , Revista digital La Pasión del Saber : Vol. 15 No. Número Especial (2025): XIII Congreso Centroamericano y del Caribe de Salud Ocupacional. FECACSO 2025
- Daniela Soto, Francisco Chourio, Rodrigo Pino, Administración de Anestésicos Locales en Odontopediatría , Revista digital La Pasión del Saber : Vol. 12 No. 21 (2022): La Pasión del Saber. Enero - junio 2022.
You may also start an advanced similarity search for this article.
